SthrnCmfrtr
Feb 2, 08:33 PM
Unless it's been stored in a refrigerator, the battery's likely dead (as in DEAD), too.
danman
Sep 12, 05:56 PM
I you look at the first article on the page, you will see that in a reference to an interview with Apple France director J.R. Cazeneuve, he is quoted as saying Apple worked very well with Motorola on the G5.
Bet ya a million buck we get G5's early next year.
(no, I don't have a million bucks, but hey ho)
Bet ya a million buck we get G5's early next year.
(no, I don't have a million bucks, but hey ho)
Rajani Isa
Feb 12, 11:12 AM
. The glass claiming to be strong is weak sauce and the only good things on the phone are the cameras and screen.*
Am I the only one who feels this way?
It harder glass - and it is harder to scratch. But harder objects don't necessarily resist shattering better.
Am I the only one who feels this way?
It harder glass - and it is harder to scratch. But harder objects don't necessarily resist shattering better.
Dont Hurt Me
Dec 11, 08:33 AM
Original Quicksilver had a very poor cooling solution with not much in the way of airflow. The original fan blew out if not mistaken. But that makes little sense in my view. I would have that fan sucking cool air from outside and blowing it across that sink into the system. Even open up a few of those holes on the back with a drill if you must its what i did. The big fan above the hard disc moves air to the outside of the unit. Also i dont know how you feel about this but i have notice manufactors are sloppy and stingy when applying the silicone compound between the cpu & sink. Make sure that CPU is coated 100% before mounting the heat sink. Also Quicksilver came with 2 fan guards on the power supply. One on the unit and one on the case. Remove one of these guards for even better flow of air. For example i had a 1.4 Merc extreme that would run all day at 1.47 after i made these cooling mods. quicksilver for the most part baths the componets in other componets heat and then sends that air across the sink out the system. Reverse that for better cooling. good luck.
more...
d4nn0
Dec 16, 09:00 AM
Try starting your machine holding down option(alt) with the original startup CD and start "apple hardware test" it migth give you a clue.
nope... tried it before and everything passed
nope... tried it before and everything passed
justinfreid
Jun 17, 02:28 PM
Wow, this is a nice surprise.
Apple's support for its developers gets ever better.
Apple's support for its developers gets ever better.
more...
Doctor Q
Nov 16, 10:51 PM
I wonder if the maker of Shazam was glad to be featured or sorry it wasn't their $5 Shazam Encore version.
Eso
Apr 10, 02:28 PM
You mean do I respond to overblown media hysteria and people who don't really understand how cell phones work? No, not really.
http://www.antennasys.com/antennasys-blog/2010/7/14/iphone-4-meets-the-gripofdeathinator.html
You may understand how cell phones work, but do you understand how the bumper works?
http://www.antennasys.com/antennasys-blog/2010/7/14/iphone-4-meets-the-gripofdeathinator.html
You may understand how cell phones work, but do you understand how the bumper works?
more...
BlackMax
Apr 18, 09:12 PM
Been using iKleer Apple Polish on case ,keyboard and screen, on a COOL laptop, ALWAYS spray on a Microfiber cloth, NEVER on the machine itself.
Love the stuff!!!
Even use it on my 55":eek::cool: LCD TV screen as well
iKleer Apple polish is all I use as well. Great stuff.
Love the stuff!!!
Even use it on my 55":eek::cool: LCD TV screen as well
iKleer Apple polish is all I use as well. Great stuff.
iFiend
Apr 21, 10:44 AM
Or you could just wait and order a legit one from Apple in the coming days. Some rumors point to preorders for the white opening up today.
But if you still want to buy a used black one I'll sell you mine for the price of a non subsidized iPhone 4 ;)
But if you still want to buy a used black one I'll sell you mine for the price of a non subsidized iPhone 4 ;)
more...
lordonuthin
Oct 21, 09:31 PM
yeah that's way over my head. not really sure what to tell you. i kinda tried to do it earlier this fall, with no luck either
I'll post it elsewhere when I get home. I have seen a number of very similar problems that seem to stem from bad wu's so I'll keep trying. It would be my luck though to have the first wu be bad making me think my set up isn't right.
I'll post it elsewhere when I get home. I have seen a number of very similar problems that seem to stem from bad wu's so I'll keep trying. It would be my luck though to have the first wu be bad making me think my set up isn't right.
Aidoon
Mar 31, 08:52 AM
Forgive what may be a newb question, but I'm a current Windows user thinking of going bi, OS that is... I'm surprised that Boot Camp doesn't seem to offer simple backup solution. Does anybody happen to know if Parallels will backup both Windows & Mac partitions.
more...
leftywamumonkey
Feb 22, 12:44 AM
I have tried to find it before and I remember glancing at it but does anyone know where the official list is where it states the benefits of specific rankings?
Legion93
Apr 23, 09:43 PM
He used a Mac.
Image (http://boskolives.files.wordpress.com/2009/11/powerbook_5300_screen.jpg?w=400&h=263)
Looks like Mac OS X Cheetah or Puma :d
Image (http://boskolives.files.wordpress.com/2009/11/powerbook_5300_screen.jpg?w=400&h=263)
Looks like Mac OS X Cheetah or Puma :d
more...
Svenhola
Apr 30, 11:13 AM
Uh! Me too. Horrible.
robbieduncan
Apr 28, 04:32 AM
Did you read the documentation? Specifically the Animations section of the View Programming Guide for iOS (http://developer.apple.com/library/ios/#documentation/WindowsViews/Conceptual/ViewPG_iPhoneOS/Introduction/Introduction.html#//apple_ref/doc/uid/TP40009503) which is directly linked from the UIView class reference.
more...
maturola
Mar 14, 10:21 AM
As the title says my mother has an original iPad and her iPad is at 3.2.1 or whatever 3.2 or something. Anyways, my question is where can I get the 4.2.1 software for the iPad. If I restore in iTunes right now I will get 4.3. I dont want that. I want 4.2.1! Any way to do that? She is interested in jailbreaking her pad! Thanks in advance...
-Dave
As mentioned on previous post, you need to have your SHSHs saved if you want to installed anything else than the current firmware released by Apple, (currently 4.3). The windows where Apple was signing those SHSHs for 4.2.1 have already been closed (so unless somehow you got your SHSHs saved by tiny Umbrella or Cydia before) your only option is to upgrade to 4.3 or wait out for a Jailbreak tool.
-Dave
As mentioned on previous post, you need to have your SHSHs saved if you want to installed anything else than the current firmware released by Apple, (currently 4.3). The windows where Apple was signing those SHSHs for 4.2.1 have already been closed (so unless somehow you got your SHSHs saved by tiny Umbrella or Cydia before) your only option is to upgrade to 4.3 or wait out for a Jailbreak tool.
Anonymous Freak
Oct 1, 03:33 PM
Hey everyone I'm not sure if this is the right section for this, so if it isn't please point me in the right direction.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
It sounds as if the TV tuner card may be having issues. The way it works in that system is that the TV tuner card does *ALL* of work. It then throws the video over the digitally-rendered content from the Mac OS. The analog video cannot be 'captured' on a Macintosh TV, and cannot be manipulated at all within the OS; so the OS is irrelevant. It's a piece of hardware slapping the video live as it comes in over the computer graphics. Any "slowdown" is purely in the hardware tuner.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
It sounds as if the TV tuner card may be having issues. The way it works in that system is that the TV tuner card does *ALL* of work. It then throws the video over the digitally-rendered content from the Mac OS. The analog video cannot be 'captured' on a Macintosh TV, and cannot be manipulated at all within the OS; so the OS is irrelevant. It's a piece of hardware slapping the video live as it comes in over the computer graphics. Any "slowdown" is purely in the hardware tuner.
mbl42
Dec 10, 07:35 PM
Not sure if I wanna go through with it it but how does 95USD shipped sound? Also is a zip and an EZ drive the same(sorry im a dumbass)
That sounds good. I will include an AC adapter for it and the USB cable that came with it. I'm not sure what an EZ drive is though. :confused:
Edit: Just found another zip disc I could include. Also 100MB.
If you don't take it I'll stick it up on eBay, which is what I would like to do. You may have problems with customs on your end.
That sounds good. I will include an AC adapter for it and the USB cable that came with it. I'm not sure what an EZ drive is though. :confused:
Edit: Just found another zip disc I could include. Also 100MB.
If you don't take it I'll stick it up on eBay, which is what I would like to do. You may have problems with customs on your end.
cube
Sep 21, 06:29 AM
If you want silent, I would look at the Samsung SpinPoint P120, but it's not in the reliability database either. I have a P80 in my Cube and I am happy with it.
gr8tfly
May 2, 10:43 PM
No, but you could do a block copy restore of the install DVD to a small partition on either its drive, or an external HD connected to that machine.
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
janey
Apr 27, 12:25 AM
Originally posted by totalr0xx0r
walmart sells computers?!
methought walmart only sold computers with lindows, not windows.
walmart sells computers?!
methought walmart only sold computers with lindows, not windows.
maflynn
Apr 18, 02:59 PM
You had to physically remove the lens cap before shooting but I still thought it was great.
That might be why all of my images are too dark - I left the lens cap on :p
That might be why all of my images are too dark - I left the lens cap on :p
galimk
Apr 23, 05:30 PM
Look in your book for exactly what you're supposed to use for #import. You may have made a mistake.
I'm not sure, but #import seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
I'm not sure, but #import
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
No comments:
Post a Comment