ErikCLDR
Oct 20, 11:45 AM
Maybe I'll go, I am not sure though, depends what I am doing.
And West Farms technically is in Farmington, not West Hartford. I know it gets confusing- West Hartford, Farmington, and New Britain. Kinda like that blur of Simsbury, Canton, and Avon.
And West Farms technically is in Farmington, not West Hartford. I know it gets confusing- West Hartford, Farmington, and New Britain. Kinda like that blur of Simsbury, Canton, and Avon.
cbegf
Nov 13, 09:18 PM
i dont have a boot floppy can i make one from a pc or do you know where i can get one?
and how do you boot from a floppy? sorry for all the questions i havnt touched a mac since this thing worked.
and how do you boot from a floppy? sorry for all the questions i havnt touched a mac since this thing worked.
dornoforpyros
Oct 11, 09:06 AM
Well, I'm sure if these guys did it... I should be able to figure it out as well.
Thanks for your help.
Christian Louboutin helmut
more...
Christian Louboutin Pumps
Christian Louboutin Crepe
more...
Christian Louboutin Very Brode
Christian Louboutin Platform
more...
Christian Louboutin Bianca 140
Christian Louboutin Suede
more...
Christian Louboutin Very Brode
Christian Louboutin pumps
more...
Christian Louboutin Pumps
Louboutin Butterfly Pumps
more...
christian louboutin pigalle
Christian Louboutin Pigalle
more...
Christian Louboutin Black
Christian Louboutin Ambro Lace
Christian Louboutin Very Prive
Thanks for your help.
ndraves
May 2, 08:22 AM
Thanks for this, I'm going to get the crossfire cable and see if I can get it working.
more...
PixelOz
Feb 26, 04:10 PM
Updated to version 1-1: Final correction. I repositioned the computer display to a better location which I wanted to do for quite a while and I also raised the level of the grids on the floor a little bit cause they were a tad too low.
Now the 3 variants that I did (I did an Apple an Atari and also an Amiga version of this design with different colors and illumination) have the computer display in the same position. These are the updated links (well actually only the direct link to the file in Mediafire changes):
Direct link Deviantart:
http://fav.me/d36deof
Direct link to Mediafire:
http://www.mediafire.com/?6qjr6gj9mhagob6
Again, in Deviantart if you want to see my whole folder with the other wallpapers of this series and my other free things:
http://pixeloz.deviantart.com/
There in Deviantart click on the Browse Gallery button if you want to see all the other things.
And the whole Mediafire folder:
http://www.mediafire.com/?xym304qv5byua
Now the 3 variants that I did (I did an Apple an Atari and also an Amiga version of this design with different colors and illumination) have the computer display in the same position. These are the updated links (well actually only the direct link to the file in Mediafire changes):
Direct link Deviantart:
http://fav.me/d36deof
Direct link to Mediafire:
http://www.mediafire.com/?6qjr6gj9mhagob6
Again, in Deviantart if you want to see my whole folder with the other wallpapers of this series and my other free things:
http://pixeloz.deviantart.com/
There in Deviantart click on the Browse Gallery button if you want to see all the other things.
And the whole Mediafire folder:
http://www.mediafire.com/?xym304qv5byua
Cromulent
Feb 21, 11:06 AM
Dear Colleagues,
My first post here and I also apologize if this is the wrong forum. If you know of a more appropriate forum/website please let me know.
I'm authoring a CD-ROM that contains a website with images, videos, PDFs etc... This CD-ROM (essentially a "Website on Disc") will be mass replicated and sold as part of a book.
The client would like to implement some sort of copy protection that will make it difficult for people to just copy the CD or it's contents. I have been researching this for a long time now and have learned that there are many different products out there that can "supposedly" achieve this. However, due to the sheer number, I'd like to know if anyone can recommend or share his/her experiences and thoughts on the subject. To make things even trickier, is there such a solution that will prevent copying on both Mac and PC systems?
Thanks in advance for any insight!
Regards
Don't bother. No matter what you do both the book and the CD will be on the internet for download within a week. Just accept it and move on without wasting any extra money on a lost cause.
My first post here and I also apologize if this is the wrong forum. If you know of a more appropriate forum/website please let me know.
I'm authoring a CD-ROM that contains a website with images, videos, PDFs etc... This CD-ROM (essentially a "Website on Disc") will be mass replicated and sold as part of a book.
The client would like to implement some sort of copy protection that will make it difficult for people to just copy the CD or it's contents. I have been researching this for a long time now and have learned that there are many different products out there that can "supposedly" achieve this. However, due to the sheer number, I'd like to know if anyone can recommend or share his/her experiences and thoughts on the subject. To make things even trickier, is there such a solution that will prevent copying on both Mac and PC systems?
Thanks in advance for any insight!
Regards
Don't bother. No matter what you do both the book and the CD will be on the internet for download within a week. Just accept it and move on without wasting any extra money on a lost cause.
more...
SmilesLots
Apr 14, 04:11 PM
Seems that Safari or network is about 10% what it used to be in speed. I recently add the MacUpdate Spring Promo package, and seems some of the programs are POC. Not sure if this is part of the problem because the slowdown happened beore that install I think.
OK. Used Tech Tool Pro. All smart status checks ok. All 6 disks check ok. So not a disk problem since it happens on all disks.
OK. Used Tech Tool Pro. All smart status checks ok. All 6 disks check ok. So not a disk problem since it happens on all disks.
DJMastaWes
Aug 6, 04:10 PM
Inspired by your avatar?
more...
Darth.Titan
Apr 4, 09:07 AM
The second plan probably would work, but you'll have two separate wireless networks.
If you go the second route, I'd just disable wireless on the Linksys and let the Expresses handle wireless.
If you go the second route, I'd just disable wireless on the Linksys and let the Expresses handle wireless.
Kissaragi
Apr 28, 07:39 AM
SL has been great for me too. The problems your having must be maddening tho. I had a MDD g4 that would randomly freeze for no reason, drove me up the wall!
more...
cube
May 4, 11:48 AM
OK, I can power an FW400 drive from FW800. I think it was my FW400 repeater hub that couldn't be powered.
I imagine an FW800 drive can be powered from FW400, too.
I imagine an FW800 drive can be powered from FW400, too.
Lacero
Sep 9, 08:32 AM
Next time, Hillary Duff. Got to get the young 'uns while they are still impressionable. Or it might be fun to see her get laughed off stage.
more...
OzExige
Feb 2, 07:51 AM
Apple and every other computer maker is going to be held back. Don't you think apple had sandy bridge based computers in the pipeline
The biggest difference is others started shipping/advertising those computers before apple
Yeh but ...... "every other sandy bridge computer is a 'PC' and Dell/HP appear to have more stock (sandy bridge) or in the process of ramping up production, when the news broke.
The biggest difference is others started shipping/advertising those computers before apple
Yeh but ...... "every other sandy bridge computer is a 'PC' and Dell/HP appear to have more stock (sandy bridge) or in the process of ramping up production, when the news broke.
glen e
May 3, 09:47 AM
I had an iPad (1st gen) and liked it to an extent. I "need" a computer with me at all times, and the iPad just didn't cut it for me. I gave that to my dad and got an 11" MBA with 4GB, and fell in love. I no longer have to carry the 15 MBP around with me, and the air is such a nice weight and size, and packs the same punch as it's bigger brother the pro with certain obvious limitations. I would go ahead and get a $25 USB DVD burner from newegg, and consider using USB drives or cloud storage as you mentioned. as far as iwork/office goes, if you are making these presentations and not distributing it to others, iwork would be fine. If others are giving you powerpoints and you are displaying them, you might want to get office to ensure compatibility.
thanks so much - I think I'll get one today...the 999 model should do it, right?
never storing more than 10 meg of files on it...
thanks so much - I think I'll get one today...the 999 model should do it, right?
never storing more than 10 meg of files on it...
more...
brn2ski00
Jun 24, 01:24 PM
hey i had said i wanted those but its fine, u can sell them to the other guy
PM Sent.
PM Sent.
entropybran
Jan 21, 09:43 PM
I have a slight predicament. I recently deleted iChat because I was having major issues with it. (was hanging OSX) I tried to use Pacifist to extract it off the installation CDs, but my disk 2 is damaged rendering it unreadable.
Is there any other way possible of getting ichat back?
I must also note that I also deleted the receipt copy by mistake. :(
thanks,
Bran
Is there any other way possible of getting ichat back?
I must also note that I also deleted the receipt copy by mistake. :(
thanks,
Bran
more...
jonnyb
Jun 19, 01:32 AM
This is wierd
I came past 10 minutes ago and there were about 20 people outside maybe more
I went looking for breakfast, came back and now there's only 7 people between me and the front of the queue
(an some guy is scrubbing the pavement clean)
either they are batch processing the early arrivers OR there was a big fight and the guy is scrubbing away the blood
Us special early arrivers are already inside. They let us in and we're lined up round the stairwell. ;)
I came past 10 minutes ago and there were about 20 people outside maybe more
I went looking for breakfast, came back and now there's only 7 people between me and the front of the queue
(an some guy is scrubbing the pavement clean)
either they are batch processing the early arrivers OR there was a big fight and the guy is scrubbing away the blood
Us special early arrivers are already inside. They let us in and we're lined up round the stairwell. ;)
mainstreetmark
Nov 1, 12:09 PM
We have:
Apple CEOs
Apple Desktops
Apple Events
Apple Hardware
Apple ICs
Apple Information
Apple Laptops
Apple Services
Apple Software
Companies
Consumer Software
Graphics
Mac Desktops
Mac OS X
Networking
Operating Systems
Ports
Pro Software
Processors
Prosumer Software
Storage
Stubs
Third-Party Hardware
Third Party Hardware
Third Party Software
What a mess! We should standardize all these now, before it's too late! For example:
"Pro Software" vs "Prosumer Software" ??
Third-Party Hardware vs Third Party Hardware
I'm not really behind the whole "third party" distinction in the first place. We should have:
- Software
- Hardware
Software could be broken down in the various apple-provided subcategories as I described in a previous post. The whole "prosumer/consumer" category really only applies easily to Apple stuff. Sure, photoshop may be a "prosumer" app, but would Graphics Converter? It's used by pro's. I suspect most people who are looking for a solution wouldn't be going down a "pro" vs "consumer" road, but rather after a specific kind of application (an Internet utility, for example). This doesn't exclude a "Software->Apple Prosumer" category.
Hardware should similarly have a standard breakdown: Displays, CPUs, Mouses, etc... No need to necessarily differentiate between Apple/non-Apple stuff here. There should be no "Apple Displays" subcategory, but the Cinema Display could be in both Hardware->Displays, and Hardware->Apple Hardware (but not only Hardware->Apple Displays)
Apple CEOs
Apple Desktops
Apple Events
Apple Hardware
Apple ICs
Apple Information
Apple Laptops
Apple Services
Apple Software
Companies
Consumer Software
Graphics
Mac Desktops
Mac OS X
Networking
Operating Systems
Ports
Pro Software
Processors
Prosumer Software
Storage
Stubs
Third-Party Hardware
Third Party Hardware
Third Party Software
What a mess! We should standardize all these now, before it's too late! For example:
"Pro Software" vs "Prosumer Software" ??
Third-Party Hardware vs Third Party Hardware
I'm not really behind the whole "third party" distinction in the first place. We should have:
- Software
- Hardware
Software could be broken down in the various apple-provided subcategories as I described in a previous post. The whole "prosumer/consumer" category really only applies easily to Apple stuff. Sure, photoshop may be a "prosumer" app, but would Graphics Converter? It's used by pro's. I suspect most people who are looking for a solution wouldn't be going down a "pro" vs "consumer" road, but rather after a specific kind of application (an Internet utility, for example). This doesn't exclude a "Software->Apple Prosumer" category.
Hardware should similarly have a standard breakdown: Displays, CPUs, Mouses, etc... No need to necessarily differentiate between Apple/non-Apple stuff here. There should be no "Apple Displays" subcategory, but the Cinema Display could be in both Hardware->Displays, and Hardware->Apple Hardware (but not only Hardware->Apple Displays)
romeo.xk
Mar 14, 10:00 AM
And if you would have taken the time to go to the right forum and look on the first page you would have seen that we have been talking about it since 8pm last night.
EDITMAN2411
Apr 23, 10:25 PM
So Im a freelance Editor/Motion Graphics guy with no real understanding of RAID Controller Cards, or how they work.
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
As of right now I have three 1TB drives inside my Mac Pro, RAIDed together (stripe 0) using the OS. No Raid card.
The drives are all 7200rpm from varying manufacturers. (not sure if this matters.)
My questions is; is it beneficial for me to get a RAID card to control these drives vs. leaving it to the OS to handle? Any suggestions for me?
Thanks.
2010 8-Core Mac Pro 2.4
14GB RAM
Dane D.
Feb 16, 07:35 PM
PS.
I always wonder how they sell these USB turn tables. I would have thought that anyone who has vinyl records would already own a turn table and would simply use that connected to the audio input on the Mac.
This should answer your question:
I always wonder how they sell these USB turn tables. I would have thought that anyone who has vinyl records would already own a turn table and would simply use that connected to the audio input on the Mac.
This should answer your question:
HE15MAN
Apr 9, 06:13 PM
It adequate my proximity sensor sketchy as hell
wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
bigandy
Aug 9, 02:06 AM
that's a great pic. tastefully done too. me likey.
well done iBlue and e. :)
well done iBlue and e. :)
No comments:
Post a Comment